Bosch Dishwasher

Bosch Dishwasher Troubleshooting: How To Reset The Bosch Dishwasher Error Code E24?

by with No Comment BoschDishwasher

Bosch Dishwasher Troubleshooting: How To Reset The Bosch Dishwasher Error Code E24?

If you own a Bosch dishwasher, you may have experienced the error code E24. This error code indicates a drainage problem and can prevent your dishwasher from functioning properly. However, you don’t need to panic as there are ways to fix the issue. In this article, we’ll guide you through the process of resetting the Bosch dishwasher error code E24 and getting your dishwasher back in working condition.

Table of Contents

  1. Understanding the Bosch Dishwasher Error Code E24
  2. Reasons Behind the Bosch Dishwasher Error Code E24
  3. Checking the Drainage System
  4. Cleaning the Dishwasher Filter
  5. Checking the Drain Hose
  6. Resetting the Bosch Dishwasher Error Code E24
  7. Running a Test Cycle
  8. Additional Tips to Avoid Bosch Dishwasher Error Code E24
  9. When to Call a Professional
  10. Frequently Asked Questions
    1. What does the Bosch dishwasher error code E24 mean?
    2. Can I fix the Bosch dishwasher error code E24 by myself?
    3. How often should I clean the dishwasher filter?
    4. Can a clogged garbage disposal cause the Bosch dishwasher error code E24?
    5. How much does it cost to repair the Bosch dishwasher with error code E24?

Understanding the Bosch Dishwasher Error Code E24

The Bosch dishwasher error code E24 indicates a drainage problem. This means that the dishwasher is not able to drain the water properly, resulting in an error code on the display panel. If you see the error code E24 on your Bosch dishwasher, you need to address the issue before using your dishwasher again.

Reasons Behind the Bosch Dishwasher Error Code E24

There are several reasons why you might be seeing the error code E24 on your Bosch dishwasher. Some of the most common causes include:

  • Clogged drain hose
  • Clogged garbage disposal
  • Blocked dishwasher filter
  • Malfunctioning drain pump
  • Broken drain pump impeller

Checking the Drainage System

Before you reset the Bosch dishwasher error code E24, it’s essential to check the drainage system of your dishwasher. Start by turning off the power to your dishwasher and disconnecting it from the electrical outlet. Next, remove the bottom dish rack and inspect the drain area. Remove any food debris or other objects that may be clogging the drain.

Cleaning the Dishwasher Filter

Another common cause of the Bosch dishwasher error code E24 is a blocked dishwasher filter. Over time, food particles and other debris can accumulate in the filter, preventing water from draining properly. To clean the filter, follow these steps:

  1. Turn off the power to the dishwasher and unplug it from the electrical outlet.
  2. Locate the filter on the bottom of the dishwasher.
  3. Twist the filter counterclockwise and remove it from the dishwasher.
  4. Rinse the filter under running water to remove any debris.
  5. Reinstall the filter by twisting it clockwise.

Checking the Drain Hose

If the drain hose is clogged, it can cause the Bosch dishwasher to error code E24. To check the drain hose, follow these steps:

  1. Turn off the power to the dishwasher and unplug it from the electrical outlet.
  2. Locate the drain hose at the back of the dishwasher.
  3. Remove the hose from the dishwasher and check for any clogs or obstructions.
  4. Use a pipe cleaner or a long wire brush to clear any clogs.
  5. Reattach the hose to the dishwasher and make sure it’s securely fastened.

Resetting the Bosch Dishwasher Error Code E24

After checking the drainage system, cleaning the dishwasher filter, and checking the drain hose, it is time to reset the Bosch dishwasher error code E24. Follow these steps:

  1. Press the power button to turn off the dishwasher.
  2. Wait for a few minutes to allow the dishwasher to cool down.
  3. Press and hold the Start button for about 5 seconds until the Active light starts flashing.
  4. Release the Start button and wait for the dishwasher to finish its reset cycle.
  5. Once the reset is complete, the Active light will stop flashing, and the dishwasher will be ready to use again.

Running a Test Cycle

After resetting the Bosch dishwasher error code E24, it’s a good idea to run a test cycle to make sure everything is working correctly. Follow these steps:

  1. Load the dishwasher with a few dishes and close the door.
  2. Press the power button to turn on the dishwasher.
  3. Select a cycle and press Start.
  4. Wait for the dishwasher to complete the cycle and check for any error codes.

If you don’t see the error code E24 again, your dishwasher is now functioning correctly.

Additional Tips to Avoid Bosch Dishwasher Error Code E24

To avoid the Bosch dishwasher error code E24, follow these tips:

  • Run hot water in the sink before starting the dishwasher to ensure that the water entering the dishwasher is hot.
  • Don’t overload the dishwasher, as this can prevent water from draining properly.
  • Scrape any excess food particles off dishes before loading them in the dishwasher.
  • Clean the dishwasher filter regularly to prevent clogs.

When to Call a Professional

If you’ve tried all the steps above and are still seeing the Bosch dishwasher error code E24, it may be time to call a professional. A qualified technician can diagnose and fix any underlying issues with your dishwasher.

Frequently Asked Questions

  1. What does the Bosch dishwasher error code E24 mean?

The Bosch dishwasher error code E24 indicates a drainage problem.

  1. Can I fix the Bosch dishwasher error code E24 by myself?

Yes, you can fix the Bosch dishwasher error code E24 by following the steps outlined in this article.

  1. How often should I clean the dishwasher filter?

It’s a good idea to clean the dishwasher filter once a month to prevent clogs.

  1. Can a clogged garbage disposal cause the Bosch dishwasher error code E24?

Yes, a clogged garbage disposal can prevent water from draining properly, causing the Bosch dishwasher error code E24.

  1. How much does it cost to repair the Bosch dishwasher with error code E24?

The cost of repairing the Bosch dishwasher error code E24 can vary depending on the underlying issue. It’s best to contact a qualified technician for an accurate quote.

Conclusion

The Bosch dishwasher error code E24 can be a frustrating issue, but with the steps outlined in this article, you can reset the error code and get your dishwasher back in working condition. By taking care to clean your dishwasher filter regularly and avoiding overloading your dishwasher, you can prevent the error code from occurring in the future.